VSCCC's Classified Ads...

Note: all prices are $CDN unless stated otherwise.

Warning: VSCCC is in no way responsible for potential purchasers using this list to contact vendors with any conditions, including the following:

This is a scam, and although the draft or cheque may look authentic, it will be a fake and worthless.
Check out your purchaser before handing over the vehicle or title to it.

VEHICLES FOR SALE


1957(?) AUSTIN CAMBRIDGE A55(Apr17)

VERY SOLID and STRAIGHT CAR!
Black car photo is an example of a finished car.

Floors are wall to wall solid except for perforation at the lower passenger side kick panel and a bit on the floor in that area. Trunk floor and everywhere else is very good!
Engine block and head are not installed but included.
Missing transmission, drivers' side front door and hood.
Rolls easily.
Lots of parts in boxes.
Nice glass for what's there.

Would make a great SOLID project if you have or can find the missing door and hood.

Car is in Cardston, Alberta - 2 hours south of Calgary.
DELIVERY is AVAILABLE.

Only $800.00 with delivery available.
No trades.

Call or text Alan if you have the cash and your wife's permission. (403)360-2904

1957(?) AUSTIN CAMBRIDGE A551957(?) AUSTIN CAMBRIDGE A55
Sample AUSTIN CAMBRIDGE A55




1952 MGTD Mark II Roadster(Apr17)

Only 1,710 ever built between 1950 and 1953. Out of that limited production, just 700 units were a left-hand wheel, set aside for export to the U.S. market.

Body Number 13784/83-879
Body Type - 22381
Vin # 14231

Complete History with the Car.


Please contact Pauline at 604-325-9252




1970 Lotus Europa S2(Dec16)

Second owner. It has been stored for about 25 years. I had thought it be a restoration project for me and/or my son, but it was not to be.
It is in need of a new windscreen, I assume an engine teardown, rubber replacements, missing one passenger side interior door panel.
I have a workshop manual and 2 extra original lotus rims.

Backstory: I purchased it from the original owner in 1971 (age 21 first car). It was my sole daily driver for about 10 years, and secondary for another 5. At that point it needed a new head gasket, and I had it repainted metallic red. The shop went into bankruptcy while the car was in. Work was completed, but it was running poorly on return. They had lost an interior door panel, and I suspect some of the brass nuts sealing the exhaust intake manifold resulting in cross breathing. I was lucky to get it back in the circumstances. It was all sufficiently depressing that the car went into storage uncovered where it remained for the next 30 years. It has never been washed since repainting, so there should be no swirl marks if gently cleaned.

Open to offers

Please contact John by email




1979 Camaro Z28(May16)

about 77,000 km. This car sat parked in a garage for over 20 years.

Open to offers
Please contact Dennis Kinasewich at 780- 916-4999 or by email




1997 Mercedes-Benz SL 500(May16)

Convertible, hard and soft top, 77,000 km, Stored and covered in the garage all the time. Cover comes off only when taken for a spin.

Open to offers
Please contact Dennis Kinasewich at 780- 916-4999 or by email




1981 Morgan Plus 8(May16)


1981 Morgan Plus 8. Very low Mileage. 5 Speed manual Transmission. 3.5 Litre Rover V8. Very powerful. Excellent condition. Original owner. Complete import documents and service records available on request. Savannah Beige body with Nut Brown fenders and Brown Leather upholstery. Aluminium bonnet and fenders. Reclining folding seats. Top, tonneau and side screens to match interior. Cast alloy 15" wheels with Pirelli P6 tires. De-cambered front suspension. Nardi wood-rim steering wheel.

$65,000 CAD
Please contact Chris Lindeburg at CDN Mobile: 1.403.860.1045 or USA Mobile: 1.406.253.7546


1981 Morgan Plus 81981 Morgan Plus 8







CARS WANTED


Triumph TR7 coupe(Oct16)

I am looking for a Triumph TR7 coupe (or even a rough TR8 coupe) with the vinyl sliding roof option (webasto). I don't care about the colour or even running condition as long as it is essentially rust free and it rolls.
A workable interior is a huge plus.

Please contact Kent Blair at 403-603-8280 or email





Land Rover Series II(Feb16)

I am looking for a Land Rover Series II Forward Control, preferably LHD, preferably Series IIb, (1967-1972), as a project vehicle; any location and any condition would be considered.

This was a rare beast in the 60s, so if you know someone, who might know someone else, who may have one, that maybe for sale, please let me know! Thanks!

Contact: Ian Laird, (403) 6293832, or email









PARTS FOR SALE


Triumph TR6 steel wheels(August 15)

A set of Triumph TR6 steel wheels for sale $200

Contact John Parfitt 403-471-5117





Early MG B parts(Dec13)

Non synchro transmission (no overdrive), rear axle, brake, suspension and steering parts.
$250.00 for the lot

4 good MG B Rostyle wheels
$100.00 for the 4 wheels

Also, have for sale or trade both doors in good condition for a Volvo 122, 2 door plus trunk lid

Would love to see this stuff in any garage but mine.


Contact Bill Wertzler at 403-245-1603 or by email







TOOLS, MAGAZINES & MANUALS, STORAGE


Campbell Hausfeld 6hp Compressor(Apr17)


Campbell Hausfeld 6hp, 60gallon, 125psi heavy duty compressor with attached water trap and pressure adjustment. Comes with 40' of hose, impact air gun, tire inflator with gauge, air nozzle, die grinder, and rivet gun. All in excellent condition.

$650
Please Phone/text 403.461.4570 Dave Barlass


Campbell Hausfeld 6hp Compressor





Bead Blasting Cabinet(Apr17)


Commercial grade bead blasting cabinet. Older unit but better than the cheap ones they sell today. Good size and well lit. Attached water trap, extra nozzles, protective plastic sheets for inside of glass, 20L of good used plastic beads.

$300
Please Phone/text 403.461.4570 Dave Barlass


Bead Blasting Cabinet





Mig Welder(Apr17)


Solar 110v portable Mig welder with two helmets(one auto darkening), gloves, spare rolls of wire, gas flow meter and pressure regulator. Can weld up to 1/4" steel. Adjustable arc strength and wire speed. Incredibly easy to use.

$250
Please Phone/text 403.461.4570 Dave Barlass


Mig Welder





Engine Stand 1,000lb Capacity(Apr17)


Rolling, 1,000lb capacity engine stand with adjustable 360 rotating head. Makes engine/transmission rebuilding far easier.

$100
Please Phone/text 403.461.4570 Dave Barlass


Engine Stand 1,000lb Capacity





Engine Hoist(Apr17)


Two ton capacity, hydraulic, folding engine hoist on wheels. This is a well built, safe hoist.

$200
Please Phone/text 403.461.4570 Dave Barlass


Engine Hoist





Parts Washer(Apr17)


Good sized, powered, parts washer. Makes cleaning stuff much easier.

$100
Please Phone/text 403.461.4570 Dave Barlass


Parts Washer












PARTS WANTED


TR7 Removable Hardtop(Aug 15)

Looking for a removable hardtop to protect the car from the elements.
Don't mind a fixer-uipper as long as it is still functional.
Contact Greg Gall at 403-689-3355 or by email



Volvo 122 wagon driver's door(Dec13)

Volvo 122 wagon driver's door.
Any leads on 122 wagon doors much appreciated.
Thanks.

Contact Bill Wertzler at 403-245-1603 or by email










VSCCC accepts no responsibility for quality, quantity or condition of any item advertised on this page.
Webmaster accepts no responsibility for errors or ommissions of posted items.


If you don't see a menu on the left, click on Home Page
Home Page

Last updated June 11, 2017
Vintage Sports Car Club of Calgary
webmaster: M.Stonehocker,  Email Us